Problems and solutions for the renovation of heating and exchange stations in universities

Problems and solutions for the renovation of heating and exchange stations in universities

The solution for the renovation of heating and cooling stations at universities is to classify buildings according to their use and heating needs.For example, different buildings may require different heating temperatures and durations, and therefore multiple heating and cooling stations should be set up for different purposes. The area under the control of the station should be kept within 80,000 square meters, and the radius of the station should not exceed 400 meters.This is because the maximum operating radius of the station is around 400 meters, and the most economical equipment is suitable for the station.

To improve the efficiency of the heating system, it is recommended to install multiple heating and cooling stations and adjust the temperature and duration of each station according to the characteristics of the buildings.This will minimize the number of blind spots and improve the effectiveness of the system. It is also recommended to install water meters to measure the water usage and optimize the heating system.

Finally, it is recommended to install a damper system to regulate the flow of hot water in the system.The installation of a damper system can reduce the water flow and achieve better system balancing. However, the installation of dampers requires a certain amount of expertise, and it is not recommended for beginners.